Brickform E-Etch

E-Etch® is an environmentally friendly, industrial-strength floor cleaner, degreaser and light etching product from Brickform. It cleans and prepares cementitious surfaces for acid staining, decorative overlays, water-based stains and coatings, and it can be used on concrete, stucco, terrazzo and most masonry to open up the surface pores and remove grime, dirt, grease, scuff marks and stains. It is a safer alternative to acid etching: the formula contains no hydrochloric acid.

E-Etch is concentrated and can be used straight or reduced with up to 50% water, depending on the condition of the floor. Apply, let it work for 2 to 3 minutes (10 to 15 minutes on heavily soiled areas), scrub, then rinse with clean water and pick up the residue with a wet vac. Do not let it dry on the surface. One gallon of undiluted E-Etch covers approximately 250 sq ft. It also removes excess Antique Release from textured concrete and works as an efflorescence remover.

Not for use on metal or any surface that can be damaged by acidic products. Wear gloves and goggles.

Features & Benefits

• No hydrochloric acid; contains no harmful acids or petro-chemicals
• Cleans, degreases and lightly etches in one step
• Concentrated; use straight or diluted up to 50%
• Biodegradable, non-corrosive, rinses off with water
• Removes efflorescence and excess Antique Release
• VOC compliant